How to Setup Wifi-wavlink

To use wifi.wavlink.com, you need something like a computer or phone. On the Wifi.wavlink.com setup page, you can manage your WiFi extender and change settings like the WiFi password, firmware update, and reset process. In this article, we’ll give you all the tips and tricks you need to fix any problem you might have got to the Wavlink setup page.

wifi.wavlink.com: Extender setup

Open the box and turn on your Wavlink extender.
Put the extender close to your main router.
Wait until your booster’s power light is stable.
Use any smart device that you have.
Open the settings menu on your WIFI device and click on WIFI.
Connect to the Wavlink extender setup EXT.
Visit WiFi.wavlink.com.
Now you can see that the page for setting up the new extender is open.
To set up your Wavlink extender, follow the instructions on the screen.

Wavlink Extender installation with WPS Button

You can either perform the http://wifi.wavlink.com setup, or you can use the WPS button for the Wavlink extender setup. Following are the steps to set up the Wavlink extender.

When you set up the Wavlink extender this way, you don’t need to enter the user ID and password. Follow the steps below to set up the WPS button on the Wavlink WiFi range extender:

First, connect your Wavlink extender close to your home WiFi router and turn it on.
Then, find the WPS button on the Wavlink extender and press it for 5-6 seconds. Then, press the WPS button and let go.
Now, within two minutes of pressing the button on the extender, press the WPS button on the WiFi router.
If the Wavlink extender has a green LED light, this means that it is connected to the wireless network.
Lastly, you can plug your Wavlink extender into the new location and connect your Wi-Fi-enabled devices to the Wavlink extender network.

How to reset Wavlink repeater using wifi.wavlink.com

You need to go to wifi.wavlink.com to reset your Wavlink repeater. You can reset your extender in just two to three minutes using this local address.

Follow these steps to use wifi.wavlink.com to reset your repeater:

Plug in the repeater first.
Get in touch with the Wavlink N Network.
Go to wifi.wavlink.com right now.
Type in Admin, and Hit Login.
You should now be on the page for managing Wavlink.
Find the Settings or Advanced option and click on it.
Here the “Reset” button is present.
Sometimes when you can’t use a phone, tablet, or computer. In that case, you can use the Hard reset button to reset the Wavlink extender. Which takes less time and isn’t hard to do.

How do I log in to my wavlink WiFi extender?

The way to log in to your wavlink Wi-Fi extender is very easy.

Follow the steps that follow:

Get on your device.
Write wifi.wavlink.com into the address bar and hit “Enter.”
The normal login page for the Wavlink extender shows up on the screen.
Then type in your username and the password you made when you set up your computer.
After that click the “Login” button.
You can now change all of your Wavlink range extender settings.

Why is wifi.wavlink.com not working?

If you are having trouble with wifi.wavlink.com not working, you are on the right page. In this section, we’ll talk about why wifi.wavlink.com won’t open or work. As you already know, this address is used to set up a Wavlink repeater, and you can also use it to manage your repeater.

Troubleshooting steps for Wifi.wavlink.com

Your extender should be close to your router.
You need a laptop, desktop, or phone to get to the page.
Wifi.wavlink.com is a local webpage.
To get the address, you need to be linked to the repeater.
Make sure that the extender’s power light is on.
Use Google Chrome, Microsoft Edge, Safari, etc. to get to the wavlink setup page.

How to hard reset the Wavlink wifi repeater?

If you do a hard reset, your device will go back to its factory settings. If you forget the password for your wavlink wifi extender, you can reset your extender settings.

Just plug your booster in.
Use a solid pin to press the reset button.
Keep it there for about 8 to 10 seconds.
Then wait for your Wavlink repeater to start up again.
When it’s done, all of the lights will be flashing green.
In just a few seconds, you can watch a light close by itself.
That means that your device has been reset.
If you have any questions about your Wavlink booster, you can get in touch with our experts, who will do their best to answer your questions. Live chat or by phone.

Wifi Extender Setup is an independent service provider. Any references to Trademarks, Brands, Products, and Services are for informational purposes only, and Wifi Extender Setup has nothing to do with any of those companies unless that is made clear. Some of the services we offer may also be found on the websites of the brand owners.

Victoral Hub